Remote Roc Hob Mxs Aerobatic Artf W/O Tx/Rx/Batt Free FMS Polo Shirt & FMS Base ball hat


Roc Hob Mxs Aerobatic Artf W/O Tx/Rx/Batt

1 in stock

  • Done Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Done Secure Payments
  • Visa Card
  • MasterCard
SKU: RCROC018 Categories: , Tag:


Roc Hob Mxs Aerobatic Artf W/O Tx/Rx/Batt

Introducing the all New 1100mm MXS 3D aerobatic plane from FMS Models. Designed for the Intermediate to advanced 3D pilot & Built specifically for 3D Flight, the MSX is sure to please even the most capable of 3D pilots. 

Built from super strong EPO foam, the receiver ready MXS is completely glue-less to assemble requiring only 10 screws to complete. After only minutes of assembly, it is ready to add your 4 channel receiver and 3s 2200mAh battery. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The powerful 35-36 1250kv Outrunner, 40amp ESC, & 4 Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long, servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2” wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy! 

Painted in Bright Yellow and Black, The New MXS is sure to get attention at the flying field… Easy to assemble, built tough, & 3D ready. Look no further than the New MXS from FMS Models! 

RocHobby MXS Features:

  • Easy to assemble glueless design
  • New Hollow wing design for reduced weight and rigidity
  • Wing tip Side Force Generators for superior Knife Edge and slow maneuvering
  • Super strong laminated control surface hinges
  • Powerfull 35-36 1250kv outrunner motor
  • 4 Digital metal gear servos
  • Wings and tail remove for transport, however 1100mm size makes transport easy
  • Ultra visible Yellow & Black high contrast saint scheme

Spec Check:

  • Wingspan: 1100mm /43.3in
  • Overall Length: 1080mm /42.5in
  • Flying Weight: 1050g /37.1oz
  • Motor Size: 3536-KV1250
  • ESC: 40A
  • Servo: 9g digital metal gear x 4
  • Radio: 4 Channel
  • CG (center of gravity): 70-80mm (From Leading Edge)
  • Prop Size: 11*5.5 2 blade propeller
  • Recommended Battery: Li-Po 11.1V 2200mAh 35C
  • Approx. Flying Duration: 5 minutes
  • Minimum Age Recommendation: 14+
  • Experience Level: Intermediate
  • Recommended Environment: Outdoor
  • Assembly Time: 45 Minutes
  • Material: EPO

Sold with a 3-Pin, 220V UK Standard Plug Charger.

Additional information

Weight16 kg